All Skills > Feature Setup > Instrumentation Guide

Sentry Instrumentation Guide: When to Reach for What

Errors, traces, logs, and metrics are the four kinds of telemetry most apps run on, and they overlap enough that the choice is rarely obvious. You can stuff context into a span attribute instead of logging it. You can count log lines instead of emitting a metric. You can add a duration to a log and call it a span.

But each signal exists because it answers a different question and feeds a different workflow once it lands. Reaching for the wrong one means the data is technically there but useless for the job you actually have later. This skill is the decision framework: given a value or an event in front of you, which signal should carry it, and why.

It decides what to emit. For how to turn each pillar on for a given stack, hand off to the sentry-*-sdk skills and sentry-setup-ai-monitoring.

Invoke This Skill When

• You're instrumenting a piece of code and unsure whether something should be a log, a span, a span attribute, or a metric
• You're deciding "what to instrument where" across a service or request handler
• You're reviewing existing instrumentation for gaps (e.g. an error feed that's empty while users report problems)
• A coding agent needs a consistent rule for choosing between errors, traces, logs, and metrics

Important: The SDK APIs and code samples here are illustrative. Verify exact signatures and minimum versions against docs.sentry.io and the relevant sentry-*-sdk skill before implementing.

The Four Signals, One Question Each

A useful mental split: a log is one request's story (the needle), a metric is the aggregate (whether the haystack is normal), a trace is where the time went, and an error is the thing that needs a stack trace and an owner.

The Decision Table

Use this as a gut check:

Resolving the Overlaps

The same value can legitimately appear in more than one signal. These four tiebreakers cover almost every real case. (Full reasoning, gotchas, and the "why not just log everything / emit one wide event?" arguments live in references/choosing-signals.md.)

• Span attribute or metric? Context about one request's flow that you want while reading that trace → span attribute (it rides on the span in the waterfall). A standalone value you want to chart, alert on, or slice over time across all requests → metric. The same number can warrant both: candidate_count on the span to read one request, recommendations.served as a metric to watch the rate.
• Log or span? The span is the timed node in the flow (mostly auto-instrumented, you rarely write it). The log is the decision-point state inside that node (you always write it on purpose). Span answers where and how long; log answers what was true and why.
• Log or metric? A log finds the one specific request that went wrong (the needle). A metric tells you how many requests went wrong (the haystack). Don't derive a rate by counting log lines — emit the metric directly.
• Error or log? Needs a stack trace and should be tracked as an Issue → error. An unexpected-but-handled condition worth recording → log. Truly non-critical with a traceback → logger.warning(exc_info=True) keeps the trace in logs without creating noise in the error feed.

Sampling vs Filtering — Match Retention to the Question

Each signal's retention falls out of the question it answers:

• Traces are sampled. You don't need every request to understand where time goes, so keep a representative slice via traces_sample_rate (higher in dev, lower in production).
• Errors are captured by default. No sampling to think about for the baseline.
• Logs and metrics are NOT sampled. You keep every one and filter instead, with before_send_log and before_send_metric. This is the point: the whole reason for a log is to find the one rare request that went sideways, and you can't find what you sampled away.

(For the exact sampling and filtering config in your language, see the matching SDK skill's references/tracing.md and references/metrics.md.)

Because all four signals come from one SDK, they share a trace_id and correlate on their own — every log and metric is tied to its trace, so you can drill from a metric spike straight into the samples behind it.

What Deliberate Instrumentation Looks Like

Roughly 80% of spans are auto-instrumented by your framework and database integrations — you write almost none of them. The deliberate work is the other 20%: a span attribute or two to enrich the flow, a decision-point log, and a metric, placed at the spots where your code makes a choice worth questioning later.

references/instrumentation-examples.md walks through a single request handler instrumented end to end, in both Python and JavaScript/TypeScript, showing the span attribute, the log, and the metric side by side on the same decision.

Handing Off to Setup

This skill tells you what to emit. To actually wire a pillar up:

• Install the SDK and turn on tracing, logs, and metrics → the matching sentry-<platform>-sdk skill (e.g. sentry-python-sdk, sentry-nextjs-sdk, sentry-node-sdk). Each has per-feature reference files for tracing, logging, metrics, and more.
• Instrument LLM / agent calls → sentry-setup-ai-monitoring.

Logs and metrics are the two pillars most projects haven't turned on yet, and both are included on every plan. If they aren't enabled, route to the SDK skill first, then come back here to decide what to put where.