Webflow Cloud

Initialize new projects from templates and deploy to Webflow Cloud. Supports two modes: site-attached (deploy to an existing Webflow site) and project app (deploy as an independent project, no existing site required).

Instructions

Step 0: Verify CLI is installed

webflow --version

If the command is not found, install it:

npm install -g @webflow/webflow-cli@latest
# or yarn global add @webflow/webflow-cli@latest
# or pnpm add -g @webflow/webflow-cli@latest

Then proceed to state detection.

Step 1: Detect project state

Run both checks before deciding which path to follow:

# Is this project already set up on Webflow Cloud?
cat webflow.json

# Is there a git remote?
git remote get-url origin 2>/dev/null

Quick reference:

You are running without a TTY. The CLI's interactive prompts only fire when process.stdin.isTTY is true. As an agent invoking the CLI through a subprocess, you do not have a TTY — every prompt is silently skipped, and any required value that wasn't passed as a flag triggers a hard error like --project-name cannot be empty.

Rule for every command in this skill: pass all required flags explicitly. Never rely on prompts. Pass --no-input when the CLI accepts it to make this contract explicit. The required flag set per command:

Command	Always pass
cloud init (site-attached)	--no-input --project-name <3–39 chars> --framework <astro|nextjs> --mount <path> --site-id <id>
cloud init --new (app)	--no-input --project-name <3–39 chars> --framework <astro|nextjs> --workspace-id <id>
cloud deploy (site-attached)	--no-input --mount <path> --environment <env> --site-id <id> plus --project-name on first deploy
cloud deploy (project app, first deploy)	--no-input --mount <path> --environment <env> --workspace-id <id> --project-name <name>

--site-id, --project-id, --framework, and --workspace-id on cloud deploy let agents override what's in webflow.json at deploy time.

Multi-workspace tokens used to be an agent-fatal hang because workspace selection had no non-TTY path. Now pass --workspace-id to skip the picker. The workspace ID is not surfaced anywhere in the Webflow dashboard UI — users can't look it up by hand. If the agent doesn't have it, ask the user to run webflow cloud deploy interactively once from inside their project. The preflight prompts for workspace selection and writes cloud.workspace_id to webflow.json; from that point the agent can read it from the manifest and pass --workspace-id on subsequent runs. Do not suggest cloud init --new for ID discovery — on an existing project it creates a discarded scratch directory. Exception: in Path A2 (empty directory) it is safe to try cloud init --new without --workspace-id to auto-resolve a single-workspace token — see Path A2.

Site IDs are visible in the dashboard. When --site-id is needed but unknown, do not ask the user for a raw site_XXXX value — use webflow sites list to fetch their sites and present a picker keyed by display name. Users can still check their dashboard to fetch it.

Path A: No project_id — new project

The project has not been deployed yet. Before doing anything else, ask the user one question:

"Do you already have source code for this project (an existing Next.js or Astro codebase), or are you starting from an empty directory and want a Webflow starter scaffold?"

That answer chooses the branch — and they're meaningfully different:

After the branch decision, also ask site-attached vs app (only relevant before the first deploy):

If the user is ambiguous on either question, ask. Do not default.

Path A1: existing codebase, no Webflow Cloud config yet

The user has working source. cloud deploy handles everything — framework detection runs against package.json, and the preflight phase resolves identity from flags or prompts the user. No cloud init needed, no webflow.json to hand-write up front.

Step 1: One-time auth (human-only). Tell the user to run this locally; agents cannot drive the browser flow:

webflow auth login

Step 2: Deploy. The exact form depends on what the agent knows.

A1-a — Site-attached, --site-id is known:

webflow cloud deploy --no-input \
  --site-id site_abc123 \
  --project-name my-app \
  --framework nextjs \
  --mount /app \
  --environment main \
  --skip-mount-path-check \
  --skip-update-check

--framework is optional if package.json has the framework's Cloudflare adapter (@opennextjs/cloudflare, @astrojs/cloudflare). Pass it explicitly for monorepos or when auto-detection is unreliable.

If the agent doesn't know the user's --site-id, do not ask for a raw site_XXXX value — use webflow sites list to fetch the user's sites and present readable display names to pick from.

A1-b — Project app, --workspace-id is known:

webflow cloud deploy --no-input \
  --workspace-id ws_abc123 \
  --project-name my-app \
  --framework nextjs \
  --mount / \
  --environment main \
  --skip-mount-path-check \
  --skip-update-check

A1-c — Project app, workspace ID is unknown (the common gap):

The workspace ID is not visible anywhere in the Webflow dashboard UI. Users cannot look it up by hand — the only way to discover it is to run the CLI. So the path is:

Ask the user to run one interactive deploy locally. From inside their project directory:

webflow cloud deploy

With no --no-input and no identity flags, the preflight prompts: "This project isn't initialized for Webflow Cloud. How would you like to deploy?" → user picks "Create a new app" → workspace picker → done. After this one human-driven deploy, cloud.workspace_id and siteId are written to webflow.json and WEBFLOW_SITE_ID to .env. The agent can then run all subsequent deploys with --site-id (the newly provisioned site).

Do not ask the user to run cloud init --new to "discover" their workspace ID. On an existing project that creates a discarded ./<project-name>/ scratch directory with a hello-world scaffold inside the user's repo. Use the interactive cloud deploy path above — it discovers the workspace ID and completes the first deploy in the same step.

Step 3: Set up git (if not already) — same as Path A2 step 3 below.

Path A2: empty directory, scaffold from scratch

1. Scaffold the project — pick the form that matches the user's intent:

   Copy

   # Project app (no site attachment). --workspace-id avoids the multi-workspace hang.
   webflow cloud init --new --no-input \
     --project-name my-app \
     --framework astro \
     --workspace-id ws_abc123

   Copy

   # Site-attached (connect to an existing Webflow site). Requires --site-id.
   webflow cloud init --no-input \
     --project-name my-app \
     --framework astro \
     --mount /app \
     --site-id site_abc123

   See cloud init for all flags.

   Workspace ID discovery for project apps in Path A2 only: because Path A2 starts from an empty directory, cloud init --new creates a fresh scaffold either way — there's nothing to pollute. So if the agent doesn't have --workspace-id, it's safe to try cloud init --new without it first:

   Copy

   # Try this first if --workspace-id is unknown (Path A2 only — empty dir)
   webflow cloud init --new --no-input \
     --project-name my-app \
     --framework astro

   • Single-workspace tokens: the CLI auto-selects the only workspace, writes cloud.workspace_id to webflow.json, and exits 0. Read it back from the manifest and pass it as --workspace-id to cloud deploy in step 2.
   • Multi-workspace tokens: the workspace picker fires and the command hangs (no TTY). Set a 30-second timeout on the Bash call (or wrap the command in timeout 30s ...) — a successful single-workspace init completes in 10–20 seconds (OAuth check + GET /v2/workspaces + scaffold download from GitHub), so anything past 30s with no output is the picker hanging. Once the timeout fires, ask the user for the workspace ID directly and re-run with --workspace-id.

   For site-attached in Path A2, there is no equivalent auto-discovery — --site-id is always required up front. Use the site picker pattern below to help the user pick.

   Path A1 (existing codebase) does not get this trick. Running cloud init --new in an existing project creates a discarded scratch subdirectory. The Path A1 workspace-ID discovery path stays as documented in Path A1-c.

Picking a --site-id from a list

When --site-id is needed (Path A1 site-attached, Path A2 site-attached, or anywhere else) and the user hasn't given one, use webflow sites list --json to enumerate sites the token can see, then present a short list of readable names for the user to choose from. The site ID is visible in the Webflow dashboard URL config, but a numeric-ID prompt is bad UX; surface display names instead unless asked for IDs.

# Returns a JSON array of sites with id, displayName, lastPublished, etc.
webflow sites list --json

Workflow:

1. Run webflow sites list --json. The CLI exits 0 with a JSON array.

2. Parse the output. Show the user a short list keyed by displayName (and lastPublished if the user has many sites). Example:

   Copy

   Which site should this project deploy to?
   
   1. Acme Marketing  (last published 2 days ago)
   2. Acme Docs       (last published 3 weeks ago)
   3. Acme Internal   (never published)

3. Map the user's pick back to its id field. Pass that as --site-id.

If webflow sites list errors (auth missing / expired), surface the error and ask the user to run webflow auth login locally; do not try to drive it from the agent.

2. Deploy: pick the form matching the init form above. Pass --site-id (or --workspace-id for project-app first deploy) so the deploy can't misread the manifest if something is half-written.

   Copy

   # Project-app first deploy — provisions the Cloud site/project/env
   webflow cloud deploy \
     --no-input \
     --project-name my-app \
     --workspace-id ws_abc123 \
     --mount / \
     --environment main \
     --skip-mount-path-check \
     --skip-update-check

   Copy

   # Site-attached first deploy — uses the existing Webflow site
   webflow cloud deploy \
     --no-input \
     --project-name my-app \
     --site-id site_abc123 \
     --mount /app \
     --environment main \
     --skip-mount-path-check \
     --skip-update-check

   This creates the project on Webflow Cloud and sets cloud.project_id in webflow.json. Commit the updated webflow.json.

3. Set up git (if not already):

   Copy

   git init && git add . && git commit -m "init"
   git remote add origin https://github.com/your-org/my-app.git
   git push -u origin main

4. (Optional) Enable push-to-deploy via the Webflow dashboard. Pushing to GitHub alone does not trigger deploys — that wiring lives in the Webflow dashboard, not in the CLI or the repo. Tell the user:

   1. Open the Webflow dashboard → their Cloud project → Settings → Git
   2. Connect their GitHub account, then select the repository and branch
   3. Confirm — the dashboard runs one initial deploy automatically to verify the connection
   4. From that moment on, every push to the connected branch triggers a deploy

   The CLI cannot perform any of these steps. If the user skips this, every deploy must be a manual webflow cloud deploy invocation (Path B–style) or a CI/CD pipeline.

If a deploy auth error occurs in step 2: run webflow auth login, complete the browser flow, then retry.

Path B: project_id exists, no git remote — existing project, no git

The project is already on Webflow Cloud but has no git repo. Deploy directly and nudge toward git setup.

1. Deploy: read webflow.json first. If siteId is set, pass --site-id matching it. If only cloud.workspace_id is set, pass --workspace-id matching it.

   Copy

   webflow cloud deploy \
     --no-input \
     --site-id site_abc123 \
     --mount / \
     --environment main \
     --skip-mount-path-check \
     --skip-update-check

2. Nudge toward push-to-deploy: suggest the user initialize a git repo, push to GitHub, and then connect the repo in the Webflow dashboard (project → Settings → Git). The dashboard step is what activates push-to-deploy — the CLI can't do this. See Path A, steps 3–4.

If a deploy auth error occurs: run webflow auth login, complete the browser flow, then retry step 1.

Path C: project_id exists + git remote — possibly ideal

The project is deployed and has a git remote, but the existence of a remote is not proof that push-to-deploy is wired up. That wiring is a dashboard-side connection that the CLI can't introspect. Confirm before suggesting anything.

Always ask the user: "Is this repo connected to your Webflow Cloud project in the dashboard (project → Settings → Git, with a branch selected)?" The answer changes the recommendation:

• Yes, connected — push-to-deploy is active. The only action needed is git push. Do not suggest re-linking or re-deploying.
• No, not connected — git push does nothing on the Webflow side. Either run a manual deploy now, or have the user connect the repo in the dashboard first to activate push-to-deploy for future commits.
• Don't know — assume not connected and recommend the dashboard connection (one-time setup, then push-to-deploy is permanent).

1. If connected — just commit and push:

   Copy

   git add .
   git commit -m "your message"
   git push

   Webflow Cloud picks up the push and deploys automatically. The first deploy after connection is run by the dashboard itself; subsequent pushes are picked up automatically.

2. If not connected — two routes:

   • Activate push-to-deploy for future commits (recommended). Tell the user to open the Webflow dashboard → their Cloud project → Settings → Git, connect the repo, select the branch. The dashboard runs an initial deploy automatically to verify the connection. From then on, every git push to that branch deploys.
   • One-off manual deploy now, without enabling push-to-deploy. Pass --site-id matching the siteId in webflow.json:
     Copy

     webflow cloud deploy \
       --no-input \
       --site-id site_abc123 \
       --mount / \
       --environment main \
       --skip-mount-path-check \
       --skip-update-check

     This deploys the current state but does not wire up push-to-deploy. The next git push will still be a no-op on the Webflow side.

If a deploy auth error occurs: run webflow auth login, complete the browser flow, then retry.

Tool usage

• Use the Bash tool for all webflow cloud commands
• Use the Read tool to examine webflow.json, package.json — never modify these directly
• Use the Glob tool to discover project files
• Do not use Webflow MCP tools for CLI workflows

Authentication

# Interactive — local-only, opens a browser. NOT for agents or CI.
webflow auth login

webflow auth login performs an OAuth flow in the user's browser and then writes the token to .env. It refuses to run with --no-input (exits with No-input mode enabled. Aborting OAuth authentication). Agents cannot drive this command. If webflow auth login is needed (missing or expired token), ask the user to run it locally once and report back when it's done.

The CLI writes the same token env var for both modes. There is no per-mode split.

webflow auth login writes to .env:

After the first project-app deploy, the CLI provisions a site on the backend and writes WEBFLOW_SITE_ID to .env. From that point on, the project behaves like a site-attached project — but the token env var is still WEBFLOW_API_TOKEN.

Deprecated legacy: WEBFLOW_SITE_API_TOKEN (and WEBFLOW_WORKSPACE_API_TOKEN) are read-only legacy fallbacks. The CLI never writes them, but if it finds one of them set in the environment when WEBFLOW_API_TOKEN is not set, it uses the legacy value and prints a deprecation warning on every run. Do not put WEBFLOW_SITE_API_TOKEN in .env or CI secrets for new projects — use WEBFLOW_API_TOKEN.

Other env vars (any mode):

WEBFLOW_SITE_ID env var is read-only. Used at runtime when no flag or manifest value is set, but never written back to webflow.json. Setting WEBFLOW_SITE_ID=X in .env will not update the manifest — only cloud init, cloud deploy, and the manifest itself drive that.

GitHub Secrets: use WEBFLOW_API_TOKEN for the token in every mode. Also set WEBFLOW_SITE_ID for site-attached projects and project apps that have already had their first deploy. Never commit .env files. If existing CI uses WEBFLOW_SITE_API_TOKEN, rename it — the deploy will still succeed but every run prints a deprecation warning until you switch.

Configuration — webflow.json

{
  "siteId": "site_abc123",
  "cloud": {
    "project_id": "proj_xyz",
    "environment_id": "env_xyz",
    "workspace_id": "ws_xyz",
    "framework": "nextjs",
    "skipMountPathCheck": false
  }
}

All cloud.* keys are snake_case (project_id, not projectId).

The CLI also writes cloud.deployment_type ("ssr" | "ssg" | "spa") and cloud.entrypoint_path into the bundled webflow.json at build time (these power the cosmic deployer's wrangler config). They're build-time outputs — do not strip them from the source webflow.json if you find them there; missing values silently break Next.js server-side deploys.

cloud.framework resolution at deploy time:

1. webflow.json exists with cloud.framework — used as-is. Invalid value exits with code 1.
2. webflow.json exists but cloud.framework is absent — throws: "webflow.json exists but doesn't contain valid framework information under the 'cloud' key". Add "cloud": { "framework": "nextjs" } manually.
3. No webflow.json — auto-detected from package.json. CLI writes a new webflow.json on success.

Projects created via cloud init always land in case 1.

Commands

webflow cloud list

webflow cloud list

Lists available scaffold templates. Check this before cloud init --framework to confirm valid scaffold IDs.

webflow cloud init

Bootstrap a new project locally. Two modes: site-attached and app.

Site-attached (connects to an existing Webflow site):

# Agent / non-TTY — always pass every flag
webflow cloud init \
  --no-input \
  --project-name my-app \
  --framework nextjs \
  --mount /app \
  --site-id site_abc123

# Human at a real terminal — interactive prompts will fill in any missing flag
webflow cloud init

Flags:

Credential resolution for --no-input site-attached: --site-id flag → siteId in webflow.json → WEBFLOW_SITE_ID env var → error.

After scaffolding a site-attached project, the CLI automatically runs a DevLink sync.

Project app (no site attachment):

# Agent / non-TTY — always pass --workspace-id to skip the workspace picker
webflow cloud init --new --no-input \
  --project-name my-app \
  --framework nextjs \
  --workspace-id ws_abc123

# Human at a real terminal — prompts for workspace if not passed
webflow cloud init --new

If the token sees multiple workspaces and the agent doesn't have a workspace ID, ask the user to run webflow cloud deploy interactively from inside their project — the preflight prompt picks a workspace and writes cloud.workspace_id to webflow.json for subsequent agent-driven runs. The workspace ID is not exposed in the Webflow dashboard UI, so the interactive CLI run is the only practical way to discover it.

Workspace selection (project-app mode only): if --workspace-id is not passed, the CLI calls GET /v2/workspaces to enumerate workspaces the token has access to. Single workspace is auto-selected; multiple workspaces trigger an interactive picker. With --workspace-id the API roundtrip is skipped — the CLI trusts the flag and surfaces a 404 later via createCloudApp if it's invalid. The chosen ID is persisted as cloud.workspace_id in webflow.json.

Agent caveat: if the user's token sees more than one workspace and the agent can't pass --workspace-id, the picker fires and hangs in non-TTY contexts. The workspace ID is not visible in the Webflow dashboard UI, so the recovery is: ask the user to run webflow cloud deploy interactively once from inside their project. The preflight prompt picks the workspace, completes a first deploy, and writes cloud.workspace_id (plus siteId, project_id, environment_id) to webflow.json. The agent can then read the workspace ID from the manifest and pass --workspace-id (or --site-id, now that the site exists) on subsequent runs. To target a different workspace later, delete cloud.workspace_id and have the user repeat the interactive deploy.

webflow cloud create (deprecated)

webflow cloud create <name> still works but emits a deprecation warning and will be removed in a future major release. It's hardcoded to /app mount in site-attached mode and offers a strict subset of cloud init. Always prefer cloud init (or cloud init --new for app mode).

webflow cloud deploy

Preflight phase: identity resolution. Before any backend call, cloud deploy runs a preflight step that resolves whether this is a site-attached deploy or a project-app first deploy. Resolution order (first match wins):

This preflight phase exists to prevent the project-app deploy path from running and provisioning a Cloud app before identity is locked in — earlier versions could orphan a new Webflow site if any later step failed.

Pass --site-id or --workspace-id explicitly whenever you can. It defends against half-written manifests and removes the dependence on whatever state cloud init happened to leave behind. If the user wants site-attached, pass --site-id. For project-app first deploy, pass --workspace-id.

Project-app first deploy (triggered by --workspace-id flag or manifest.cloud.workspace_id) calls POST /cosmic/workspaces/:workspace_id/cloudApps to atomically create a site, project, and environment. On success it writes siteId, cloud.project_id, and cloud.environment_id into webflow.json, writes WEBFLOW_SITE_ID into .env, and forces --skip-mount-path-check for that one deploy. Subsequent deploys behave like normal site-attached deploys.

If --project-name is omitted on the first project-app deploy, the CLI uses the cwd folder name (when 3–39 chars) and falls back to "Cloud App". Provide --project-name explicitly in CI to avoid surprises.

Uninitialized projects (no siteId, no workspace_id, no flag): the CLI prompts the user to create a new project app, attach to an existing site, or cancel. With --no-input it hard-errors listing the required flags. Agents running with --no-input must always supply --site-id or --workspace-id on the first deploy of an uninitialized project.

There are two deployment approaches. GitHub-linked deployment is recommended — it requires no CI configuration. After a one-time dashboard setup (which the CLI can't do), every push to the connected branch triggers a deploy.

Option 1 (recommended): GitHub-linked deployment

Once a one-time dashboard setup is done, every push to the connected branch triggers a deploy — no CLI commands, no workflow file. The setup is dashboard-only — the CLI cannot reach this state on its own. Pushing a repo to GitHub does not, by itself, enable push-to-deploy.

1. Push the project to GitHub (the user needs at least one commit pushed)
2. Tell the user to open the Webflow dashboard → their Cloud project → Settings → Git and connect their GitHub account if not already connected
3. Select the repository, then the branch to deploy from (e.g. main)
4. Confirm — the dashboard runs an initial deploy automatically to verify the connection
5. From that point on: git push to the connected branch = deploy

Steps 2–4 cannot be scripted. If the user wants push-to-deploy, they have to click through the dashboard once. After that, the agent's job for this project is essentially done — future deploys happen on push.

When suggesting a deployment setup to a user, always lead with this option. Only suggest GitHub Actions if the user needs custom pre/post steps, secrets injection, or multi-environment logic that the native GitHub integration does not cover.

Option 2: GitHub Actions (manual CI/CD)

Use when you need custom build steps, environment-specific secrets, or deploy gates not supported by the native GitHub integration. See the GitHub Actions example in the Examples section.

Option 3: Local / manual deploy

For development and one-off deploys:

webflow cloud deploy \
  --no-input \
  --mount / \
  --environment main \
  --skip-mount-path-check \
  --skip-update-check

All cloud deploy flags:

Agents: pass --mount AND --environment together, every time. The deploy prompts (select existing project, name a new project, pick an environment) are gated on whether --mount and --environment are both set — not on --no-input. Pass --no-input without both and the project-select prompt still fires and hangs in non-TTY contexts. The minimum agent-safe deploy flag set is --no-input --mount <path> --environment <env> --site-id <id> (or --workspace-id <id> for project-app first deploy), plus --project-name whenever cloud.project_id is absent from webflow.json.

Frameworks

Any other value in cloud.framework causes cloud deploy to exit with code 1.

Scaffolds are fetched from GitHub at init time. The CLI downloads scaffold tarballs from Webflow-Examples/hello-world-{astro,nextjs}* (pinned to the v1 branch). cloud init therefore requires network access to github.com. Old CLI installs keep working because the registry pins a vN branch per scaffold-contract version.

Global flags

Output

After a successful cloud deploy, the CLI prints two pieces of output.

1. Deployment dashboard URL — always present on success:

https://webflow.com/dashboard/sites/{siteId}/webflow-cloud/projects/{projectId}/environments/{environmentId}/deployments/{deploymentId}

Always show this to the user. From here they can view build logs, deployment status, history, and environment settings.

2. Live app URL — conditional:

🌐 Your cloud app will soon be available at:
   https://{your-site}.webflow.io/{mount-path}

If a real URL is printed, show it to the user as the live app link. The domain is their Webflow site's domain and the path is whatever --mount value was used at deploy time (e.g. /, /app, or any other user-chosen path).

If the output instead reads No domains found with the correct mount path configuration yet., do not show a live URL — point the user to the dashboard deployment link above to check status and configure their domain.

Do not fetch or curl either URL to verify the deploy — just return what the CLI printed.

Examples

Full workflow: scaffold → GitHub → dashboard connection → push-to-deploy (recommended)

The CLI handles steps 1 and 2. Step 3 must happen in the Webflow dashboard — the CLI cannot do it. Without step 3, pushing to GitHub does not deploy.

# 1. Scaffold locally (CLI)
webflow cloud init --new --no-input \
  --project-name my-app \
  --framework nextjs \
  --workspace-id ws_abc123

# 2. Push to GitHub (CLI / git)
git init && git add . && git commit -m "init"
git remote add origin https://github.com/your-org/my-app.git
git push -u origin main

# 3. Connect in the Webflow dashboard (manual, dashboard-only):
#    a. Open the Cloud project → Settings → Git
#    b. Connect the GitHub account (if not already), pick the repo
#    c. Pick the branch to deploy from (e.g. main)
#    d. Confirm — the dashboard runs an initial deploy to verify the wiring
#
# After step 3, every push to the selected branch triggers a deploy automatically.
# Skip step 3 and push-to-deploy is NOT active — deploys must be manual or CI-driven.

Project-app workflow: init → first deploy provisions site

# Agent-safe init — assumes the token sees a single workspace.
# If the token sees multiple workspaces, ask the user to run this command locally first.
webflow cloud init --new --no-input \
  --project-name my-app \
  --framework astro

# First deploy creates site + project + environment on the backend,
# writes siteId / project_id / environment_id back to webflow.json,
# and writes WEBFLOW_SITE_ID to .env. Subsequent deploys are normal.
cd my-app
webflow cloud deploy --no-input \
  --project-name my-app \
  --mount / \
  --environment main \
  --skip-update-check

Scaffold a site-attached Astro app locally

webflow cloud init \
  --no-input \
  --project-name my-site-app \
  --framework astro \
  --mount /app \
  --site-id site_abc123

GitHub Actions CI/CD pipeline (when custom steps are needed)

name: Deploy to Webflow Cloud

on:
  push:
    branches: [main]

jobs:
  deploy:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

      - uses: actions/setup-node@v4
        with:
          node-version: 20

      - name: Install Webflow CLI
        run: npm install -g @webflow/webflow-cli@latest

      - name: Deploy
        run: |
          webflow cloud deploy \
            --no-input \
            --mount / \
            --environment main \
            --skip-mount-path-check \
            --skip-update-check
        env:
          WEBFLOW_API_TOKEN: ${{ secrets.WEBFLOW_API_TOKEN }}
          WEBFLOW_SITE_ID: ${{ secrets.WEBFLOW_SITE_ID }}
          # For project apps pre-first-deploy, omit WEBFLOW_SITE_ID

Manual deploy (local / one-off)

webflow cloud deploy \
  --no-input \
  --project-name my-app \
  --mount / \
  --environment main \
  --skip-mount-path-check \
  --skip-update-check

Manual deploy with error handling

webflow cloud deploy --no-input --mount / --skip-mount-path-check --skip-update-check
if [ $? -ne 0 ]; then
  echo "Deploy failed. Log file:"
  webflow log
  exit 1
fi

Guidelines

Init vs Deploy in CI

• cloud init is for local, one-time project setup — never run it in CI. Site-attached mode opens a browser window; there is no headless OAuth path. Run cloud init once locally, commit the result, then use cloud deploy in CI.

Mount path

• --mount is always required with --no-input. The CLI does not read a saved mount path from webflow.json.
• Never assume a default. Assuming / or /app will cause ENVIRONMENT_MOUNT_MISMATCH if the project uses a different path. Check the Webflow dashboard under the project's environment settings.

Do not add confirmation gates

When --no-input is set, do not add a human confirmation step before cloud deploy. It blocks unattended CI runs and is unnecessary — the CLI has no built-in prompt to bypass.

Package manager

The CLI uses npm only regardless of lock files present. pnpm and yarn lock files are ignored — those projects silently receive npm install.

Build-time file management

During cloud deploy, the CLI temporarily replaces two files and restores them on success or failure:

• Framework config (next.config.ts / astro.config.mjs) — renamed to clouduser.*, replaced with CLI template, then restored.
• wrangler.json — replaced with CLI template (original saved to clouduser.wrangler.json), then restored. Do not modify wrangler.json during a deploy.

If Astro is the framework and @astrojs/react is absent, the CLI runs npm install --save @astrojs/react without prompting.

Cloudflare bindings (D1 / KV / R2)

The CLI merges wrangler.json bindings at build time. Limits: max 5 of each type. For D1, set migrations_dir in the binding — the CLI copies migration files automatically.

Error handling

• The CLI exits with code 1 on every error. Check the exit code — do not match on emoji or text patterns in stdout.
• Use webflow log after any failure to get the full error trace.

Deploy versioning

Commit all changes before deploying to production.

Known limitations

• No cloud status / cloud logs — use the Webflow dashboard.
• No cloud env commands — runtime env vars managed via dashboard only.
• No --dry-run — build validation always triggers a real deployment.
• No --json / structured output — deploy URL and project ID must be parsed from stdout.
• No cloud rollback.
• 100 MB build size limit — builds exceeding 104,857,600 bytes fail at upload.

Troubleshooting

--project-name cannot be empty (or any required-flag error) on cloud init

The CLI gates its interactive prompts on process.stdin.isTTY. Agents invoke the CLI from a subprocess that does not have a TTY, so the prompt block is skipped entirely and the bare validation fires for the first missing required value.

Fix: pass every required flag explicitly. For cloud init:

webflow cloud init --new --no-input --project-name my-app --framework astro
# or, site-attached:
webflow cloud init --no-input --project-name my-app --framework astro --mount /app --site-id site_abc123

Passing --no-input is not strictly required for the prompts to be skipped — the absent TTY already does that — but it makes the contract explicit and matches the Required-flag matrix at the top of this skill.

cloud init --new hangs forever / never returns

Workspace selection in project-app mode prompts unconditionally when the token sees more than one workspace. Pass --workspace-id to skip the picker; without it, in a non-TTY context the CLI hangs at the prompt.

Fix: pass --workspace-id <id> to cloud init --new. The workspace ID is not visible in the Webflow dashboard UI, so when the agent doesn't have one, ask the user to run webflow cloud deploy interactively from inside an existing project. The preflight prompt picks a workspace and writes cloud.workspace_id to webflow.json — the agent can then read it and pass --workspace-id on future runs. Single-workspace tokens are not affected — selection is auto-skipped.

Deploy provisioned a new site when I expected site-attached

Symptom: user wanted to deploy to an existing Webflow site, but cloud deploy printed Creating Cloud app... / Cloud app created: <name> and the live URL came out as <name>-<hash>.webflow.io (a freshly minted site) instead of the user's intended site.

Cause: webflow.json was in the project-app init state — cloud.workspace_id set, siteId absent — typically because the project was previously scaffolded with cloud init --new. The preflight phase prefers explicit flags but still falls through to the manifest when none are passed.

Prevention (primary fix): pass --site-id <existing-site-id> to cloud deploy. The preflight phase resolves identity from flags first, so this overrides whatever's in webflow.json and routes the deploy to the intended Webflow site. The skill should always pass --site-id when site-attached intent is known.

webflow cloud deploy --no-input \
  --site-id site_abc123 \
  --mount /app --environment main \
  --skip-mount-path-check --skip-update-check

Recovery if the new site was already created:

• Keep the new project-app site the deploy just created — do nothing; subsequent deploys will go to the same site (or pass --site-id of the new site if there's any ambiguity).
• Re-target an existing Webflow site instead. The auto-provisioned site cannot be re-bound to an existing site after creation. Options:
  1. Delete the project app (and its auto-provisioned site) from the Webflow dashboard.
  2. Either edit webflow.json (remove cloud.workspace_id, cloud.project_id, cloud.environment_id, siteId) and re-run cloud init with --site-id <existing-site-id>, or skip the manifest edit and run cloud deploy --site-id <existing-site-id> directly — the preflight will treat this as a fresh site-attached deploy.

Auth error on deploy

Run webflow auth login and complete the browser flow. The CLI writes a new WEBFLOW_API_TOKEN to .env. Retry the deploy after login.

In CI, browser auth is not possible — an auth error means WEBFLOW_API_TOKEN is missing or expired in your secrets. Fix the secret, do not attempt webflow auth login. If the CI uses the legacy WEBFLOW_SITE_API_TOKEN, the deploy will still work but the run log shows a deprecation warning; rename the secret to WEBFLOW_API_TOKEN to clear it.

Deploying to a different workspace

For project apps (--new): pass --workspace-id <new-id> to cloud init or cloud deploy to override cloud.workspace_id in webflow.json. Alternatively, delete cloud.workspace_id from webflow.json and re-run init (or interactive deploy on an existing project) to re-seed it.

For site-attached projects, workspace context is implicit in the auth token. Re-run webflow auth login and select the target workspace in the browser; the new token replaces the old one in .env.

First project-app deploy fails with missing_scopes

The token saved to .env doesn't include the scopes needed to create a Cloud app. Re-run webflow auth login and re-approve the scopes, then retry the deploy.

First project-app deploy fails: "your workspace has reached its app limit"

The selected workspace (cloud.workspace_id) is at its app cap. Either upgrade the workspace plan or delete unused apps in the Webflow dashboard, then retry.

First project-app deploy fails with workspace-not-found / 404

The workspace ID (from --workspace-id flag, or cloud.workspace_id in webflow.json) no longer resolves — workspace deleted, or token has no access. The CLI doesn't validate the flag up front: it trusts the value and surfaces the 404 from createCloudApp. Fixes:

• Pass --workspace-id <correct-id> to cloud init or cloud deploy.
• Or delete cloud.workspace_id from webflow.json and either re-run cloud init --new --workspace-id <id> (empty directory) or run webflow cloud deploy interactively (existing project) so the preflight prompt re-seeds the workspace ID.

ENVIRONMENT_MOUNT_MISMATCH

The --mount value does not match the path registered for that environment. Check the Webflow dashboard under the project's environment settings for the correct mount path and pass it explicitly.

Framework cannot be detected / explicit framework required

A webflow.json that has a cloud block but no framework key does not throw — the CLI falls back to detecting from package.json. The legacy error "webflow.json exists but doesn't contain valid framework information" only fires when cloud.framework is explicitly set to an unsupported value.

If framework detection still fails (monorepo, missing framework dependency, ambiguous setup), fix it with the new --framework flag on cloud deploy:

webflow cloud deploy --no-input --framework nextjs --mount /app --environment main ...

This writes cloud.framework back into webflow.json so subsequent deploys don't need the flag. Or just edit the manifest manually:

{
  "cloud": {
    "framework": "nextjs"
  }
}

Valid values: nextjs, astro. Any other value exits with code 1.

Build fails, need full trace

webflow log

Prints the path to the latest log file with the full error trace.